How To Fill Nail Holes In Reclaimed Wood
Have you e'er gotten really excited most a pallet upcycle project, but to realize that there are giant holes in the boards from the nails? Well that totally happened to me!
While working on my own pallet upcycle project (I turned it into a bath shelf! ), I realized that some pallets are nicer than others. The pallet I used was really well constructed and made of good solid wood, only after I had taken it apart I realized that the nails had left giant holes in the slats of wood! Bummer.
Simply my dad came to rescue with an awesome toothpick fob he uses all the fourth dimension in his woodworking business. Then next time you utilize reclaimed woods, your project won't exist ruined by nasty nail holes before you lot even offset!
You can come across from the picture show above that all 3 boards had holes in them from the nails. And in 2 of the boards, the nails were driven and so far in that the heads of the nails left holes as well! Yikes.
How To Set up Holes In Pallet Wood
In that location are a bunch of ways to fill a hole in a piece of woods, merely this way fills the hole completely with real forest instead of glue so that it can be stained after. You tin utilise woods gum to fill up a hole, except wood glue won't agree a stain. So unless you're planning to paint the wood rather than stain it, that won't work.
Luckily, toothpicks will do the trick! Here's what you need:
- wood glue
- a skinny piece of wood (toothpicks, skewers, or caramel apple tree sticks piece of work bully)
- a cheap pencil sharpener
- a saw
- a hammer
- sandpaper
- a rag to wipe upwardly extra gum
ane. Find a skinny piece of forest
You want a skinny piece of woods just slightly bigger around than the hole you lot are filling. This will help make certain that when you wedge the wood in, information technology will fill the hole completely. We had a bunch of extra caramel apple tree sticks from making caramel apples, so those worked perfectly. A toothpick, or bundle of toothpicks will also work. Then will wooden skewers. Or take-out chopsticks. Annihilation wooden and skinny. 🙂
2. File the wood to a indicate
Use a cheap pencil sharpener to file the woods to a point. Pencil sharpeners aren't really designed for difficult woods, then make sure it's a cheap one merely in case yous irksome the bract or something.
3. Fill the hole with wood gum, and so hammer in the pointy stop of the stick
Actress glue volition spill out of the hole, merely merely keep hammering. You want to wedge the stick equally far in as possible so that the hole is completely filled up to all edges.
4. Wipe away the excess gum immediately
Since wood glue doesn't hold a stain you desire to wipe up any actress mucilage immediately. Just apply a damp rag and wipe the entire area downwardly. Yous can see in the photo above the slightly yellow spot effectually the caramel apple stick; that is simply slightly moisture wood from where I wiped away the extra gum. If you miss any extra mucilage you can always sand it down later earlier you stain or pigment, simply information technology's easiest to wipe it abroad at this indicate before it dries.
five. Once the glue is dry, cut the stick off flush
Use a saw to cut the stick off flush with the top of the slice of wood. Don't worry nearly cutting information technology perfectly, y'all tin always sand down any extra stick that remains.
You can see higher up that I cut a niggling as well shut to the board and actually nicked it with my saw bract. But later on I took this photograph I sanded it down and it ended up okay 🙂 UPDATE: In case you missed it in the comments, my dad says that you lot can prevent these saw marks by putting down 2 or more layers of masking tape around the plug earlier cutting it off. Thanks Dad!
And that's information technology; you lot're done! Now you take a nice hole-complimentary piece of wood set up for painting or staining or whatever. And if y'all need the holes filled on both sides, only flip the board over and do the same thing from the other side!
This is as well a super useful tip if you strip a hole when y'all're screwing something together. If your drill keeps turning and turning but the screw isn't tightening downwardly, that means you've probably stripped the threads of your pigsty. Just get some forest gum and a toothpick or two and make full the pigsty the same way. Once the gum is dry you lot'll be able to sink a screw into the same spot and the screw will grab the wood of the toothpicks with no trouble!
Practise you have any quick tips for fixing upward reclaimed wood? I definitely had to mucilage a agglomeration of splintered pieces dorsum together as well as fill all these holes. I'll evidence you lot the whole project on Monday, but for now, simply know that wood glue is the best!
I link up at these crawly parties!
This post may contain chapter links to the products I apply and recommend for your convenience. Your cost won't modify, simply these links volition share a small commission that assists in the maintenance of this site.
Yous May As well Like
Love crafts & DIY?
Get free creative inspiration past e-mail
Join the Practically Functional Marking's Club electronic mail newsletter and get crafts, DIY projects, Cricut tutorials, and other inspiration in your inbox once a week for free!
Source: https://www.practicallyfunctional.com/fix-holes-in-reclaimed-wood/
Posted by: collmanpurvile51.blogspot.com
0 Response to "How To Fill Nail Holes In Reclaimed Wood"
Post a Comment